← All posts
Production

Shade Variation in Fabric: Sort Before You Cut

27 October 2026 · Kamna Team

Shade variation is when fabric that should be one colour comes out in slightly different shades. The shade can change from one roll to the next, from one end of a roll to the other, or from the middle of the fabric to its edges. In a garment it shows when a front and a back, or two sleeves, do not match.

Where does shade variation come from?

Mostly from dyeing, because fabric is dyed in batches and no two batches come out exactly the same. Small changes are enough:

  • A little more or less dye or chemicals in the batch.
  • A different temperature, time or pH.
  • Uneven drying.
  • Bulk dyeing that does not follow the lab recipe exactly.

So one order of one colour can arrive in two or three shades, even from a good dyer.

How do you check shade when fabric arrives?

Compare a swatch from every roll, under one light, against the approved shade. Step by step:

  1. Cut a small swatch from every roll.
  2. Lay all the swatches side by side, next to the approved shade.
  3. Look at them under one light. A light box with D65 daylight is the standard, because two pieces can match under one lamp and not under another.
  4. Grade each difference on the grey scale. It runs from 5, no difference, down to 1, a big difference. The buyer decides which grade passes.
  5. Group the rolls that match each other and mark each group, for example A, B and C.
  6. Keep the swatches in order on a card. This card is the shade band. The cutting room works from it, and the buyer may ask to approve it.

How does the cutting room keep shades apart?

By making sure two shades never meet in one garment. These rules do it:

  • Spread each lay from one shade group only.
  • If a lay must hold two groups, put a separator between them.
  • Number every ply. Every panel cut from that ply gets the same number.
  • Keep bundles by ply number. The sewing line joins only panels with the same number.
  • Cut a replacement panel from the same shade group, not from leftover fabric.
  • Place all panels of one garment close together in the marker, so a middle to edge difference does not fall between a front and its back.

What does a mixed shade cost?

At least one garment, and sometimes the whole shipment. A mixed shade is usually found late, at the end of the line or at the buyer's inspection. By then the fabric, cutting and stitching are already paid for. Fixing it means opening a seam and recutting a panel from matching fabric, which may be used up.

Shade is not covered by the four point system, so a roll can pass fabric inspection and still be the wrong shade.

When should fabric go back to the dyer?

Before it is cut. Return a roll that is outside the approved shade, or a lot with too many shades to group. Once fabric is cut, the loss is yours. Keep the shade band, the grade and the roll numbers with the receipt, so a claim has proof.

Found this helpful? Add us to your preferred sources for more like it.

Kamna. Not an ERP. One thing: Profit Margin. Ask your factory and it answers.

For more content like this, join us here.